HP iPAQ hx2000 Series User Manual Download

Page: 92 / 177

8VHU·V*XLGH

$SSOLFDWLRQV

Installing Applications

To install more applications on your Pocket PC:

1. Use the HP iPAQ cradle to connect your Pocket PC to your

personal computer.

2. Follow the instructions in the Installation Wizard provided

with the program you want to install.

3. Check the screen on your Pocket PC to see if any further

steps are necessary to complete the program installation.

Removing Applications

To remove applications on your Pocket PC:

1. From the

Start

tap

Settings

System

tab >

Remove

Programs.

2. Select the checkbox for the programs you want to remove,

and then tap

Remove.

Note:

By removing any application from your Pocket PC, you

increase storage memory (used to store data and document files)
and program memory (used to run programs) on the unit.

Using DockWare

DockWare is a personalized desk clock, calendar, and screensaver
for your Pocket PC. You can select preinstalled pictures to be
used as a slideshow in the background or you can add your own
personal pictures.

Summary of Contents for iPAQ hx2000 Series


















































































































































































Search results

Summary of Contents for iPAQ hx2000 Series

Reviews:

Related manuals for iPAQ hx2000 Series

Brands by name

Popular brands

HP iPAQ hx2000 Series, User Manual

Search results

Summary of Contents for iPAQ hx2000 Series

Reviews:

Related manuals for iPAQ hx2000 Series

Brands by name

Popular brands