manualshive.com logo in svg

HP iPAQ h4100, User Manual, Page: 71 / 76

Share
Download
HP iPAQ h4100 User Manual Download Page 71

Regulatory Notices

User’s Guide

A-

1

Appendix 

Regulatory Notices

Federal Communications Commission

Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following measures:

„

Reorient or relocate the receiving antenna

„

Increase the separation between the equipment and receiver

„

Connect 

the equipment into an outlet on a circuit different 

from that to which the receiver 

is connected

„

Consult the dealer or an experienced radio or television 

technician for help

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that 
are not expressly approved by Hewlett-Packard Company may void the authority to operate the 
equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector 
hoods in order to maintain compliance with FCC Rules and Regulations.

Declaration of Conformity for products marked with the FCC logo -
United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.

For questions regarding your product, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

Or, call 1-800-652-6672

For questions regarding this FCC declaration, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 510

101

Houston, Texas 77269-2000

Or, call (281) 514-3333

Summary of Contents for iPAQ h4100













































































Reviews:

No comments