manualshive.com logo in svg

HP Integrity MC990 X, User Manual

Share
Download
HP Integrity MC990 X User Manual Download Page 68

Safety and regulatory information

This appendix provides safety information and regulatory specifications for your system.

For additional important safety, environmental, and regulatory information, see 

Safety and Compliance

Information for Server, Storage, Power, Networking, and Rack Products

, available at 

http://

www.hpe.com/support/Safety-Compliance-EnterpriseProducts

.

Safety information

Read and follow these instructions carefully:

1.

Follow all warnings and instructions marked on the product and noted in the documentation included
with this product.

2.

Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning. Do not use this product near water.

3.

Do not place this product or components of this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.

4.

Slots and openings in the system are provided for ventilation. To ensure reliable operation of the
product and to protect it from overheating, these openings must not be blocked or covered. This
product should never be placed near or over a radiator or heat register, or in a built-in installation,
unless proper ventilation is provided.

5.

This product should be operated from the type of power indicated on the marking label. If you are not
sure of the type of power available, consult your dealer or local power company.

6.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on
the cord.

7.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.

8.

Do not attempt to service this product yourself except as noted in this guide. Opening or removing
covers of node and switch internal components may expose you to dangerous voltage points or other
risks. Refer all servicing to qualified service personnel.

9.

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:

• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are followed. Adjust only

those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage.

• If the product has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.

CAUTION:

Slide/rail mounted equipment is 

not

 to be used as a shelf or a workspace.

68

 Safety and regulatory information

Summary of Contents for Integrity MC990 X








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands