manualshive.com logo in svg

HP Integrity MC990 X, User Manual

Share
Download
HP Integrity MC990 X User Manual Download Page 52

• Unit identifier blue/white LED
• A green BMC heartbeat LED

If the system motherboard is powered on and there is no LED activity showing on the unit, it must be
replaced. 

Figure 19: System motherboard status LED locations and functions

 on page 52 shows

the locations of the motherboard LEDs.

1.

12V overcurrent

2.

Unit ID

3.

BMC heartbeat

4.

Top to bottom: Sleep A state, Platform Reset, Power Good HARP 0, Power Good HARP 1

5.

Top to bottom: Power Good P12V Aux, Power Good P12V E, Power Supply Power OK, System Power OK

6.

Top to bottom: Power Good P3V3 Aux, Power Good P3V3, Power Good P5V Aux, Power Good P5V

7.

Top to bottom: Power Good CPU 0, Power Good CPU 1, Power Good CPU 2, Power Good CPU 3

8.

Top to bottom: Power Good P12V A, Power Good P12V B, Power Good P12V C, Power Good P12V D

Figure 19: System motherboard status LED locations and functions

52

 Integrity MC990 X system Troubleshooting

Summary of Contents for Integrity MC990 X








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands