HP Integrity MC990 X User Manual Download Page 58

Page: 58 / 71

Table 5: MC990 X server chassis and 42U rack physical specifications

Feature

Specification

Dimensions for single MC990 X server chassis

Height: 5U 8.64 inches (22 cm)

Width: 17.5 inches (44.5 cm)

Depth: 31.8 inches (80.8 cm)

Weight of single MC990 X server chassis (fully
configured)

136 lb. (62 kg)

Dimensions for a single 24-inch wide 42U rack,
including doors and side panels

Height: 78.75 in. (200 cm)

Width: 28 in. (70.1 cm)

Depth: 45.5 in. (115.6 cm)

Shipping dimensions (single rack)

Height: 88.8 in. (225.8 cm)

Width: 44 in. (111.8 cm)

Depth: 62.75 in. (159.4 cm)

Single rack shipping weight (max)

2,070 lb. (939 kg) air cooled (approximate)

Single rack system weight installed (max)

1,579 lb. (716 kg) air cooled (approximate)

*Empty rack weight is approximately 391 lb. (177
kg)

42U rack access requirements:

Front: 48 in. (121.9 cm)

Rear: 48 in. (121.9 cm)

Top: 18 in. (45.7 cm)

Integrity MC990 X system environmental specifications

Environmental specifications

lists the environmental specifications of the Integrity MC990 X system.

Table 6: Environmental specifications

Feature

Specification

Temperature tolerance (operating)

+5 °C (41 °F) to +35 °C (95 °F) (up to 1500 m / 5000 ft.)

+5 °C (41 °F) to +30 °C (86 °F) (1500 m to 3000 m /5000 ft. to
10,000 ft.)

De-rate max ambient temperature by 1.8 °F (1 °C) per 1000 ft.
(305 m) of altitude above 5000 ft. (1525 m)

Temperature tolerance (non-
operating)

-40 °C (-40 °F) to +60 °C (140 °F)

Table Continued

Integrity MC990 X system environmental specifications

Summary of Contents for Integrity MC990 X








































































Search results

Summary of Contents for Integrity MC990 X

Reviews:

Brands by name

Popular brands

HP Integrity MC990 X, User Manual

Search results

Summary of Contents for Integrity MC990 X

Reviews:

Brands by name

Popular brands