Hardware options installation 41
11.
Connect all drive cables.
12.
Install the air baffle (on page
19
).
13.
Install the access panel (on page
17
).
14.
Install the tower bezel ("
Install the bezel
" on page
16
).
15.
Connect each power cord to the server.
16.
Connect each power cord to the power source.
17.
Power up the server (on page
16
).
Installing a hot-plug drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To install the component:
1.
Remove the tower bezel ("
Remove the bezel
" on page
17
).
2.
Remove the drive blank.
