HP HP ProLiant DL385 G6 User Manual Download Page 21

Page: 21 / 106

Operations 21

After performing the installation or maintenance procedure, slide the server back into the rack, and
then press the server firmly into the rack to secure it in place.

WARNING:

To reduce the risk of personal injury, be careful when pressing the server rail-

release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

Remove the access panel

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

For proper cooling do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize

the amount of time the access panel is open.

To remove the component:

Summary of Contents for HP ProLiant DL385 G6











































































































Search results

Summary of Contents for HP ProLiant DL385 G6

Reviews:

Related manuals for HP ProLiant DL385 G6

Brands by name

Popular brands

HP HP ProLiant DL385 G6, User Manual

Search results

Summary of Contents for HP ProLiant DL385 G6

Reviews:

Related manuals for HP ProLiant DL385 G6

Brands by name

Popular brands