HP HP ProLiant DL385 G6 User Manual Download Page 15

Page: 15 / 106

Component identification 15

Hard drive numbering

SAS and SATA hard drive LEDs

Item Description

Fault/UID LED (amber/blue)

Online LED (green)

SAS and SATA hard drive LED combinations

Online/activity

LED (green)

Fault/UID LED

(amber/blue)

Interpretation

On, off, or flashing Alternating amber

and blue

The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a

management application.

On, off, or flashing Steadily blue

The drive is operating normally, and it has been selected by a

management application.

On Amber,

flashing

regularly (1 Hz)

A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.

Off

The drive is online, but it is not active currently.

Summary of Contents for HP ProLiant DL385 G6











































































































Search results

Summary of Contents for HP ProLiant DL385 G6

Reviews:

Related manuals for HP ProLiant DL385 G6

Brands by name

Popular brands

HP HP ProLiant DL385 G6, User Manual

Search results

Summary of Contents for HP ProLiant DL385 G6

Reviews:

Related manuals for HP ProLiant DL385 G6

Brands by name

Popular brands