Hardware options installation 48
3.
Remove the hard drive.
Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
Removing expansion slot covers
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
Power down the server (on page
20
).
2.
Extend the server from the rack (on page
20
).
3.
Remove the access panel (on page
21
).
4.
Remove the PCI riser cage (on page
22
).
5.
Remove the expansion slot cover:
o
To remove slot cover 1 or 4, push in on the retainer to release it, and then slide out the cover.
Summary of Contents for HP ProLiant DL385 G6
