manualshive.com logo in svg

HP HP ProLiant DL385 G6, User Manual, Page: 34 / 106

Share
Download
HP HP ProLiant DL385 G6 User Manual Download Page 34

 

Setup 34 

 

WARNING:

  To reduce the risk of electric shock or damage to the equipment: 

•

 

Do not disable the power cord grounding plug. The grounding plug is an important safety 
feature. 

•

 

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all 
times. 

•

 

Unplug the power cord from the power supply to disconnect power to the equipment. 

•

 

Do not route the power cord where it can be walked on or pinched by items placed against 
it. Pay particular attention to the plug, electrical outlet, and the point where the cord 

extends from the server. 

  

 

Installing the operating system 

To operate properly, the server must have a supported operating system installed. For the latest 

information on supported operating systems, refer to the HP website (

http://www.hp.com/go/supportos

). 

Methods to install an operating system on the server include: 

•

 

SmartStart assisted installation—Insert the SmartStart CD into the CD-ROM drive and reboot the 

server.  

•

 

Manual installation—Insert the operating system CD into the CD-ROM drive and reboot the server. 

This process may require you to obtain additional drivers from the HP website 

(

http://www.hp.com/support

). 

For information on using these installation paths, refer to the SmartStart installation poster in the HP 

ProLiant Essentials Foundation Pack, included with the server. 

 

Powering up and configuring the server 

To power up the server, press the Power On/Standby button. 
While the server boots, RBSU and the ORCA utility are automatically configured to prepare the server for 

operating system installation.  
To configure these utilities manually: 

•

 

Press the 

F8

 key when prompted during the array controller initialization to configure the array 

controller using ORCA. 

•

 

Press the 

F9

 key when prompted during the boot process to change the server settings using RBSU. 

The system is set up by default for the English language. 

For more information on the automatic configuration, refer to the 

HP

 

ROM-Based Setup Utility User Guide

 

located on the Documentation CD. 

 

Registering the server 

To register the server, refer to the HP Registration website (

http://register.hp.com

). 

Summary of Contents for HP ProLiant DL385 G6











































































































Reviews:

No comments