HP E5200A, User Manual

Page: 67 / 152

2-19
Using the Analyzer
To Configure the Analyzer and Ports
2
Using the Analyzer
Caution You should reconfigure the ports only when the measurement system is
stopped. Reconfiguring the ports causes the measurements and some
data to be lost. A warning message appears when this occurs.
To Manually Configure Each Port
If you want to reset the configuration parameters to the default values
after you have changed them, click the Auto button. Clicking the Reset
button on the main screen also resets the port configuration parameters
to their default values.
2
Click the ATM tab;
then specify the ATM
configuration
parameters for the
port.
3
Click the Signaling
tab; then specify
the signaling
configuration
parameters for the
port.
1
Click the physical layer
tab; then specify the
physical layer
configuration parameters
for the port.