![HP E5200A User Manual Download Page 50](http://html.mh-extra.com/html/hp/e5200a/e5200a_user-manual_161552050.webp)
Using the Analyzer
To Connect to the System Under Test
2-2
To Connect to the System Under Test
1
Before you connect to the system under test (SUT), ensure that
•
the analyzer is connected to the controlling computer (workstation or
notebook PC)
•
two interface pods are inserted in the analyzer, one of which may be a
blank pod
2
Connect the interface pod(s) to the SUT. Each interface pod has a
transmit and receive connector on its front panel that you use to
connect to the SUT. See the
Setting Up the Interface Pod
guides for
specific details relating to your interface pods.
Note
If you are using an optical interface pod, ensure that the connectors on the front
panel and the test cables are clean. Refer to the appropriate
Setting Up the Interface Pod
guide for more information.
Receive (Rx)
Transmit (Tx)
Summary of Contents for E5200A
