HP E5200A, User Manual

Page: 45 / 152

1-31
Setting Up the Analyzer
To Troubleshoot the Analyzer
1
Setting Up the
Analyzer
If the Controlling Computer has No Display
❑
Check that the controlling computer power switch is on.
❑
Check that the power cable is properly connected to the controlling
computer.
❑
Check that the brightness and contrast controls are correctly set.
❑
Check that the computer has only the software specified in “Analyzer
Software” on page 1-4 loaded. Other software may interfere with the
computer configuration. Restore the hard disk by either
•
restoring the backup (see “To Restore Files from Backup Storage
Media to a Notebook PC” on page 1-25)
•
using the reset facility (see “To Reset the Notebook PC” on
page 1-27)
If You Cannot NFS Mount the Analyzer File System
❑
Check that Nfsdw and Inetdw are running on the notebook PC. If they
are running, the icons will be displayed on the screen.
If You Cannot Print to the Connected Printer
❑
Check that the PC-Xware LPD is running on the notebook PC.
❑
Check that all printer cables are connected correctly.
If the Cables Do Not Fit the Sockets
❑
Check the Box Contents lists to confirm that you have the correct
equipment.
❑
Check that you are using the correct cables for each connection. Check
the part numbers on the cables against the part numbers in the diagrams
in this
User’s Guide .