manualshive.com logo in svg

HP E5200A, User Manual

Share
Download
HP E5200A User Manual Download Page 106

Using the Online Help

To Install the Online Help

3-2

To Install the Online Help

You should install the online help when you receive a new version of the
analyzer software, or if you are setting up the analyzer to use on a
networked system (see “To Connect the Analyzer as a Networked System”
on page 1-10).

To Install the Online Help on a PC

You can install the analyzer online help on any PC with Windows 3.1 or
higher.

1

Insert the Help for Windows diskette 1 (p/n E5200-10017) in drive A. If
you have a CD-ROM drive attached to the notebook PC, use the
supplied CD-ROM.

2

From the File menu, select Run.

3

Type

a:\setup

 to install the help files from the diskettes. Type

d:\help\win\setup

 to install the help files from the CD-ROM.

4

Click OK.

Follow the instructions on the screen. After you restart Windows, three
help icons (one for each help volume), and a readme file icon appear in the
HP Broadband Analyzer program group.

Summary of Contents for E5200A

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands