HP E4418B, Programming Manual

Page: 267 / 481

prog.book : ch7mem.fm 4 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:CATalog[:ALL]?
7-4 HP E4418B/E4419B Programming Guide
MEMory:CATalog[:ALL]?
This command is used to list the stored sensor calibration tables,
frequency dependent offset tables and save/recall registers.
The power meter returns the data in the form of two numeric parameters
and as many strings as there are stored tables and save/recall registers.
<numeric_value>,<numeric_value>{,<string>}
• The first numeric parameter indicates the amount of memory, in
bytes, used for the storage of tables and registers.
• The second numeric parameter indicates the memory, in bytes,
available for the storage of tables and registers.
• Each string parameter returned indicates the name, type and size
of a stored table or save/recall register:
■
<string>
,
<type>
,
<size>
◆
<string>
indicates the name of the table or save/recall
register.
◆
<type>
indicates
TABL
for sensor calibration and frequency
dependent offset tables, or
STAT
for a save/recall register.
◆
<size>
indicates the size of the table or save/recall register
in bytes.
For example, a sample of a response may look like:
1178,26230,"DEFAULT,TABL,14","HP8481A,TABL,116",
"HP8482A,TABL,74",..........."State0,STAT,1619",
"State1,STAT,1619","State2,STAT,1619" ...........