HP Dragonfly Folio Maintenance And Service Manual Download Page 70

Page: 70 / 109

N23303-001: WUXGA, privacy
N23305-001: OLED

When installing a display panel, eight pieces of tape secure the panel. The following illustration

shows their locations.

NOTE:

The tape is double sided, with plastic covering both sides. Be sure to pull the plastic

backing off the bottom when installing the tape onto the display rear cover and off the top when

installing the display panel.

To install a display panel, install tape at the left and right (1) locations as shown in the following

illustration. Make sure the tape protrudes enough out of the rubber plug holes on both sides (2).

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands