HP Dragonfly Folio Maintenance And Service Manual Download

Page: 63 / 109

Open the computer (1), and then flip the display so that it faces away from the keyboard (2).

Remove the rubber plugs from the left and right sides of the bottom edge of the display (1).

NOTE:

There are eight pieces of tape you must remove to remove the display panel.

Under the plugs, use tweezers to grasp and pull the end of the display panel tape out from behind

the left and right sides of the panel. While turning the tweezers, wrap the tape around the tweezers

(2) as you continue to pull the tape out from behind the display panel (3). You must pull the tape

multiple times before it is completely removed.

IMPORTANT:

Slowly and carefully wrap the tape around the tweezers. Pulling on the tape can

break it before it is completely removed. Use this process for removing all display tape.

Display panel and subcomponents

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands