HP Dragonfly Folio Maintenance And Service Manual Download

Page: 44 / 109

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the magnetic pen slot:

■

Remove the Phillips M2.0 × 3.0 screw (1) that secures the magnetic pen slot to the computer, and then

slide the slot out of the computer (2).

To install the magnetic pen slot, reverse this procedure.

SIM board

To remove the SIM board, use this procedure and illustration.

Table 5-4

SIM board description and part number

Description

Spare part number

SIM board for use in models with WWAN

N22940-001

SIM board for use in models with WLAN

N22941-001

SIM cable (available in Cable Kit)

N22929-001

SIM tray and SIM insert (available in Misc Parts Kit)

N22932-001

Before removing the SIM board, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the bottom cover (see

Bottom cover on page 33

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the SIM board:

Remove the SIM holder from the side of the computer (1).

Disconnect the cable from the ZIF connector on the SIM board (2).

Remove the Phillips M2.0 × 3.0 screw (3) that secures the SIM board to the computer.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands