HP Dragonfly Folio Maintenance And Service Manual Download

Page: 50 / 109

When installing a battery, be sure to install the insulators on the top and bottom of the battery as shown

in the following illustration.

To install the battery, reverse the removal procedures.

Bottom speakers

To remove the bottom speakers, use this procedure and illustration.

Table 5-8

Bottom speakers description and part number

Description

Spare part number

Speakers (includes all speakers)

N22946-001

Before removing the speakers, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the bottom cover (see

Bottom cover on page 33

Remove the battery (see

Battery on page 42

Remove the bottom speakers:

Disconnect both speaker cables from the system board (1).

Remove the three Phillips M2.0 × 3.0 screws (2) from each speaker.

Remove the speaker cable from the two Mylar tabs that secure it (3).

NOTE:

To avoid tearing the tabs, gently pull up on the tabs when releasing the cable.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands