HP Dragonfly Folio Maintenance And Service Manual Download

Page: 47 / 109

To install the WWAN module, reverse this procedure.

NOTE:

Be sure to tighten the two screws on the right fan after installing a WWAN module.

Wireless charging module

To remove the wireless charging module, use this procedure and illustration.

Table 5-6

Wireless charging module description and part number

Description

Spare part number

Wireless charging module

N26149-001

Wireless charging module cable (available in Cable Kit)

N22929-001

Before removing the wireless charging module, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the bottom cover (see

Bottom cover on page 33

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the wireless charging module:

Remove the rubber piece from the board (1).

Disconnect the cables from the ZIF connectors on the top and bottom of the board (2).

Use a tool to release the board (3). The board is secured with adhesive.

Remove the Phillips M2.0 × 3.0 screw (4) that secures the charger bracket to the computer, and then

remove the bracket (5).

Wireless charging module

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands