HP Dragonfly Folio Maintenance And Service Manual Download

Page: 49 / 109

Remove the bottom cover (see

Bottom cover on page 33

WARNING!

To reduce potential safety issues, use only the user-replaceable battery provided with the

computer, a replacement battery provided by HP, or a compatible battery purchased from HP.

IMPORTANT:

Removing a battery that is the sole power source for the computer can cause loss of

information. To prevent loss of information, save your work or shut down the computer through Windows

before you remove the battery.

Remove the battery:

Disconnect the battery cable from the system board (1).

Remove the five Phillips M2.0 × 3.0 screws (2) that secure the battery to the computer.

Remove the antenna cable from the clip on the right side of the battery (3).

Remove the battery from the computer (4).

Battery

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands