HP Dragonfly Folio Maintenance And Service Manual Download

Page: 66 / 109

Use tweezers (2) to grasp and pull the end of the tape out from behind the top right of the panel

so that it is perpendicular to the panel (3). While turning the tweezers, wrap the tape around the

tweezers as you continue to pull the tape out from behind the display panel (4). You must pull the

tape multiple times before it is completely removed.

The following illustration shows tape locations. In this step, you are removing the tape shown by

callout 3.

Pull the panel away from the display slightly, enough to access more tape underneath (1).

Use tweezers (2) to grasp and pull the end of the tape out from behind the top left of the panel

so that it is perpendicular to the panel (3). While turning the tweezers, wrap the tape around the

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands