![HP D5970A - NetServer - LCII Installation Manual Download Page 81](http://html.mh-extra.com/html/hp/d5970a-netserver-lcii/d5970a-netserver-lcii_installation-manual_155580081.webp)
Chapter 6
Installing Additional Boards
73
For current PCI Hot Plug information regarding NOS support and the availability
of PCI Hot Plug compliant drivers, search for PCI Hot Plug on HP’s web site at:
http://www.hp.com/netserver/products/lxr8500
To access the PCI Hot Plug Replacement procedures in Information Assistant for
the respective NOS, you must have the HP NetServer Online Documentation
CD-ROM provided with the HP NetServer LXr 8500.
To view the respective Hot Plug Replacement (NOS) procedures, perform the
following steps.
1. Insert the HP NetServer Online Documentation CD-ROM into a CD-ROM
drive.
2. Select HP NetServers L-Series button.
3. Scroll down to and select HP NetServer LXr 8500 in the list.
4. Select Install.
5. Select Installing Accessory Boards.
6. Select the appropriate Hot Plug Replacement (NOS) topic.
The procedures for powering off/on the slot and removing/replacing the
PCI board are included in this section.
For more information about accessing and using the HP NetServer Online
Documentation CD-ROM and Information Assistant, refer to Chapter 11,
"Information Assistant." This chapter describes how to load and run the software
to view Information Assistant.