Chapter 4
Installing Mass Storage Devices
45
Filler
Panel
Peripheral
Bay Assembly
Front of
NetServer
Memory
Bay
Cover
Thumb
Screws (3)
Handle
LCD Panel
Handle
Figure 4-4. Removing the Peripheral Bay
10. Remove the two screws (Torx
®
T-15) holding the cover to the peripheral
bay and remove the cover. See Figure 4-5.
11. Remove the filler panel from the tape drive slot in the peripheral bay. See
Figure 4-5.
12. Remove the two mounting rails connected to the filler panel and save the
rails and screws. See Figure 4-5.
This may require a T-10 Torx
®
driver instead of a T-15 driver.
13. Remove the tape drive from the shipping container and its protective bag.
14. Remove the mounting bracket/hardware installed on the tape drive.
This may require a T-10 Torx
®
driver instead of a T-15 driver.
