49
5 Installing Additional Memory
Introduction
This chapter provides the instructions for adding memory to the HP NetServer
LXr 8500, which includes guidelines for:
•
Removing and installing a memory board (also adding a memory board)
•
Installing or removing DIMMs on the memory board in any configuration
DIMMs
DIMM Connectors
Memory Board
Figure 5-1. Memory Board and DIMMs
Required Tools
The following tools are required for removal and installation of the memory
boards and DIMMs:
•
An anti-static service kit (3M
8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
Memory Configuration Guidelines
These guidelines should be followed when installing additional DIMMs or a
second memory board in the HP NetServer LXr 8500.
