11 Enclosure network configuration commands
ADD OA DNS
•
Command:
ADD OA DNS [<bay number>] <ip address>
•
Description:
Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured
to use a static IP address.
If a bay number is not specified, the command defaults to the active Onboard Administrator.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
A maximum of two DNS servers can be added.
The <
ip address
> must be in the form ###.###.###.###, where each ### ranges from
0 to 255.
ADD SNMP TRAPRECEIVER
•
Command:
ADD SNMP TRAPRECEIVER <ip address> ["<community name>"]
•
Description:
Adds an IP address to receive SNMP traps. Traps are directed to the SNMP default port 162.
The default trap community string is public.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
A maximum of eight IP addresses can be added to receive SNMP traps.
◦
◦
Only v1 traps are supported.
◦
The <
ip address
> must be in the form ###.###.###.###, where each ### ranges
from 0 to 255.
ADD SSHKEY
•
Command:
ADD SSHKEY <end marker> <certificate> <end marker>
•
Description:
Adds an SSH key or keys to the Administrator local account. Multiple SSHKEYs can be
concatenated in the string.
1.
Locate a string that does not appear in the key, to use as the end marker.
2.
Paste in the SSHKEY string.
3.
Finish the command with the end marker.
Failure to give a proper end marker before and after the certificate might cause the interface
to wait for the appropriate end marker indefinitely.
ADD OA DNS
55
