HP Compaq NX6330 Maintenance And Service Manual Download

Page: 113 / 226

Removal and Replacement Procedures

Maintenance and Service Guide

5–27

5. Loosen the four Torx8 T8M2.0×11.0 screws

and the

three Phillips PM2.0×8.0 screws

that secure the heat sink

to the computer.

6. Lift the right side of the heat sink to disengage it from the

processor and slide the heat sink

to the right to remove it.

✎

Due to the adhesive quality of the thermal paste located
between the heat sink and processor, it may be necessary to
move the heat sink from side to side to detach the heat sink
from the processor.

Removing the Heat Sink

Summary of Contents for Compaq NX6330



































































































































































































































Search results

Summary of Contents for Compaq NX6330

Reviews:

Related manuals for Compaq NX6330

Brands by name

Popular brands

HP Compaq NX6330, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX6330

Reviews:

Related manuals for Compaq NX6330

Brands by name

Popular brands