manualshive.com logo in svg

HP Compaq NC6110, Maintenance And Service Manual, Page: 217 / 237

Share
Download
HP Compaq NC6110 Maintenance And Service Manual Download Page 217

Maintenance and Service Guide

D–1

D

Display Component Recycling

Å

WARNING: 

The backlight contains mercury. Caution should be 

exercised when removing and handling the backlight to avoid 
damaging this component and causing exposure to the mercury.

Ä

CAUTION: 

The procedures in this appendix can result in damage to 

display components. The only components intended for recycling 
purposes are the liquid crystal display (LCD) panel and the backlight. 
Careful handling should be exercised when removing these 
components.

✎

Materials Disposal

This HP product contains mercury in the backlight in the display 
assembly that might require special handling at end-of-life.

Disposal of mercury may be regulated because of environmental 
considerations. For disposal or recycling information, contact 
your local authorities or the Electronic Industries Alliance (EIA) 
at 

http://www.eiae.org

.

Summary of Contents for Compaq NC6110














































































































































































































































Reviews:

No comments