Chapter 5
hp Carrier Grade Server bh3710 Server Blade Installation Information
Management Blade
5-7
Configuration Procedures.
Power on the Console. The Management Blade boot sequence will display, followed by a login prompt.
Management Blade Configuration.
Follow the steps listed below to configure the Management Blade.
Step 1.
Log in as
root
with the password
hpblade!
.
Step 2.
Select the
Configuration Menu
from the
Management Blade
main menu and press
Enter
to begin.
Step 3.
Select the
Quick Setup
option.
Step 4.
Select the
Slot 10 Management Blade
option.
Step 5.
Tab to the
IP Address
and enter the value.
Step 6.
Select and enter a
Host name
.
Step 7.
Tab to the
Gateway Address
and enter the value.
Step 8.
Tab to
Subnet Mask
and enter the value.
Step 9.
If desired, Tab to and enter a
Domain Name
(optional).
Step 10.
If desired, Tab to and enter a
DNS address
(optional).
Step 11.
Save and exit the configuration.
Step 12.
Return to the
Quick Setup menu
for Management Processor configuration procedures listed in the
following section.
The Management Blade can now be accessed remotely via the LAN.
Summary of Contents for BH BH3710
