To replace the component, reverse the removal procedure.
M.2 SATA SSD enablement board
To remove the component:
.
2.
Disconnect all peripheral cables from the node .
3. Remove the node from the chassis
4.
In a 2U node, do one of the following:
•
Remove the three-slot PCI riser cage assembly
•
Remove the FlexibleLOM 2U node PCI riser cage assembly
5.
Do one of the following:
•
Remove the single-slot left PCI riser cage assembly
•
Remove the single-slot 2U node PCI riser cage assembly
6.
If installed, remove the storage controller.
7.
Disconnect all cables from the riser board.
8.
Loosen the T-15 screw and remove the enablement board from the PCI riser cage assembly.
• Single-slot left PCI riser cage assembly
88
M.2 SATA SSD enablement board
Summary of Contents for Apollo 2000 System
