◦ If NVIDIA Tesla P100 GPUs are installed in the server node, and the server node is installed in the HPE
Apollo r2600 Chassis, the inlet ambient temperature must be maintained at or below 20°C (68°F).
◦ To ensure proper thermal cooling when NVIDIA Tesla P40 or NVIDIA Tesla P100 GPUs are installed in
the server node, bezel blanks must be installed in specific drive bays. For more information on
supported drive configurations, see the server user guide on the
Hewlett Packard Enterprise website
For more information on the riser board slot specifications, see "
PCIe riser board slot definitions
."
Supported riser cage assemblies and accelerator power cables
FlexibleLOM 2U node riser cage assembly (PN 798184-B21)
Single accelerator options
Power cable
2-pin adapter cable
• Intel Xeon Phi Coprocessor
5110P
• AMD FirePro S9150 GPU
• NVIDIA Quadro M4000 GPU
• NVIDIA Quadro K4200 GPU
Accelerator
• NVIDIA Tesla K40 GPU
Accelerator
800288-001
Not supported
Three-slot 11OS PCI riser cage assembly (PN 798186-B21)
Dual accelerator options
Power cable
2-pin adapter cables
• Intel Xeon Phi Coprocessor
5110P
1
• AMD FirePro S9150 GPU
1
• NVIDIA Tesla K40 GPU
Accelerator
1
Both 825634-001 and 825635-001
are required
Not supported
• NVIDIA Tesla M40 GPU
Accelerator
2
• NVIDIA Tesla P40 GPU
Accelerator
2
• NVIDIA Tesla P100 GPU
Accelerator
2
Both 825636-001 and 825637-001
are required
Not supported
• NVIDIA GRID K2 Reverse Air
Flow GPU Accelerator
2
Both 825634-001 and 825635-001
are required
805206-001 required for each
accelerator
1
Dual accelerator configurations only. If installing this accelerator model, populate both slot 3 and slot 4 with
accelerators to ensure proper thermal cooling.
2
The riser cage supports both single and dual accelerator configurations for this accelerator model. If
installing a single accelerator, install it into slot 3 and leave slot 4 empty.
Three-slot Enhanced 11OS PCI riser cage assembly (PN 852767-B21)
Dual accelerator options
Power cable
2-pin adapter cables
• AMD FirePro S9150 GPU
1
Both 825634-001 and 825635-001
are required
Not supported
1
Dual accelerator configurations only. If installing this accelerator model, populate both slot 3 and slot 4 with
accelerators to ensure proper thermal cooling.
98
Supported riser cage assemblies and accelerator power cables
Summary of Contents for Apollo 2000 System
