Read the instructions carefully before installing the port lightning arrester.
Step5
Bundle the cables with nylon cable ties neatly.
Figure 3-9
Install a port lightning arrester
Precautions
Pay attention that the performance of the port lightning arrester may be affected in the
following cases:
The IN and OUT ends of the port lightning arrester are connected incorrectly.
end should be connected to the external cable, while the OUT end shou
connected to the Ethernet port of the router.
The port lightning arrester is not well grounded.
of the port lightning arrester should be as short as possible and be well connected to
the grounding screw o
connection.
The installed port lightning arresters are not sufficient.
Ethernet cable is connected to the router, you need to install a port lightning arrester
for each outdoor Ethernet cable.
Installing a Power Lightning Arrester (Lightning Protection
Busbar) (Optional)
No power lightning arrester is shipped with the router. You should purchase one if needed.
Before connecting an outdoor AC power supply to t
protection busbar at the AC power input end and then connect the AC power cord to a
Read the instructions carefully before installing the port lightning arrester.
Bundle the cables with nylon cable ties neatly.
Install a port lightning arrester
hat the performance of the port lightning arrester may be affected in the
The IN and OUT ends of the port lightning arrester are connected incorrectly.
end should be connected to the external cable, while the OUT end shou
connected to the Ethernet port of the router.
The port lightning arrester is not well grounded.Make sure that the grounding cable
of the port lightning arrester should be as short as possible and be well connected to
the grounding screw of the router. You need to check with a multimeter after
The installed port lightning arresters are not sufficient.When more than one outdoor
Ethernet cable is connected to the router, you need to install a port lightning arrester
r each outdoor Ethernet cable.
Installing a Power Lightning Arrester (Lightning Protection
Busbar) (Optional)
No power lightning arrester is shipped with the router. You should purchase one if needed.
Before connecting an outdoor AC power supply to the router, you need to install a lightning
protection busbar at the AC power input end and then connect the AC power cord to a
hat the performance of the port lightning arrester may be affected in the
The IN and OUT ends of the port lightning arrester are connected incorrectly.The IN
end should be connected to the external cable, while the OUT end should be
Make sure that the grounding cable
of the port lightning arrester should be as short as possible and be well connected to
f the router. You need to check with a multimeter after
When more than one outdoor
Ethernet cable is connected to the router, you need to install a port lightning arrester
Installing a Power Lightning Arrester (Lightning Protection
No power lightning arrester is shipped with the router. You should purchase one if needed.
he router, you need to install a lightning
protection busbar at the AC power input end and then connect the AC power cord to a
