59
Login authentication
Username:test@bbb
Password:
<Switch> ?
User view commands:
display Display current system information
ping Ping function
quit Exit from current command view
ssh2 Establish a secure shell client connection
super Set the current user priority level
telnet Establish one TELNET connection
tracert Trace route function
When switching to user privilege level 3, the Telnet user only needs to enter password
enabpass
as
prompted.
<Switch> super 3
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
If the HWTACACS server is not available, the Telnet user needs to enter password
654321
as prompted
for local authentication.
<Switch> super 3
Password:
Å
Enter the password for HWTACACS privilege level switch authentication
Error: Invalid configuration or no response from the authentication server.
Info: Change authentication mode to local.
Password:
Å
Enter the password for local privilege level switch authentication
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
RADIUS authentication and authorization for Telnet users by a
switch
Network requirements
, configure Switch B to act as a RADIUS server to provide authentication and
authorization for the Telnet user on port 1645.
Set the shared keys for authentication and authorization packet exchanges between the NAS and the
RADIUS server to
abc
. Configure the switch to remove the domain name from a username before
sending the username to the RADIUS server.
