manualshive.com logo in svg

HP A5830 Series, Configuration Manual

The HP A5830 Series is a high-performance networking solution that empowers businesses to achieve seamless connectivity. With its intuitive user interface and advanced features, this product guarantees reliable and efficient network performance. Enhance your understanding of its configuration and settings by downloading the free, comprehensive manual from manualshive.com.

Share
Download
background image

55 

# Configure 

bbb

 as the default ISP domain for all users. Then, if a user enters a username without any 

ISP domain at login, the authentication and accounting methods of the default domain are used for the 

user. 

[Switch] domain default enable bbb 

•

 

Configure 802.1X authentication. 

# Enable 802.1X globally. 

[Switch] dot1x 

# Enable 802.1X for port GigabitEthernet 1/0/1. 

[Switch] interface gigabitethernet 1/0/1 

[Switch-GigabitEthernet1/0/1] dot1x 

[Switch-GigabitEthernet1/0/1] quit 

# Configure the access control method. (Optional. The default setting meets the requirement.) 

[Switch] dot1x port-method macbased interface gigabitethernet 1/0/1 

3.

 

Verify the configuration. 

If  the  802.1X  client  of  Windows  XP  is  used,  the properties of the 802.1X connection should be 

specifically configured in the 

Authentication

 tab on the 

Properties

 page, where you must select the 

Enable IEEE 802.1X authentication for this network 

option and specify the EAP type as 

MD5-Challenge

.  

If the HP iNode client is used, no advanced authentication options need to be enabled. 
When using the HP iNode client, the user can pass authentication after entering username 

dot1x@bbb

 

and the correct password in the client property page. When using the Windows XP 802.1X client, the 

user can pass authentication after entering the correct username and password in the pop-up 

authentication page. After the user passes authentication, the server assigns the port connecting the 

client to VLAN 4. 

 

# Use the 

display connection 

command to view the connection information on the switch. 

[Switch] display connection 

Slot:  1 

Index=22  , Username=dot1x@bbb 

 IP=192.168.1.58 

 IPv6=N/A 

 MAC=0015-e9a6-7cfe 

 Total 1 connection(s) matched on slot 1. 

 Total 1 connection(s) matched. 

# View the information of the specified connection on the switch. 

[Switch] display connection ucibindex 22 

Slot:  1 

Index=22  , Username=dot1x@bbb 

IP=192.168.1.58 

IPv6=N/A 

MAC=0015-e9a6-7cfe 

Access=8021X   ,AuthMethod=CHAP 

Port Type=Ethernet,Port Name=GigabitEthernet1/0/1 

Initial VLAN=2, Authorization VLAN=4 

ACL Group=Disable 

User Profile=N/A 

CAR=Disable 

Priority=Disable 

Summary of Contents for A5830 Series

























































































































































































































































































Reviews:

No comments

Related manuals for A5830 Series

D-Link DSL-2750U Setup preview
DSL-2750U
Brand: D-Link Pages: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Brand: D-Link Pages: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Brand: D-Link Pages: 41
D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link DWL-3150 Install Manual preview
DWL-3150
Brand: D-Link Pages: 8
D-Link DSS-8+ Manual preview
DSS-8+
Brand: D-Link Pages: 22
D-Link DSS-5+ Manual preview
DSS-5+
Brand: D-Link Pages: 20
D-Link DSS-24+ Technical Specifications preview
DSS-24+
Brand: D-Link Pages: 2
D-Link DSS-24+ Manual preview
DSS-24+
Brand: D-Link Pages: 16
D-Link DI-804V Quick Install Manual preview
DI-804V
Brand: D-Link Pages: 12
D-Link DIR-615 - Wireless N Router Installation Manual preview
DIR-615 - Wireless N Router
Brand: D-Link Pages: 13
D-Link Cobra DSL-5300 User Manual preview
Cobra DSL-5300
Brand: D-Link Pages: 124
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link 2Voice + 4SW VoIP Router DVG-1402S User Manual preview
2Voice + 4SW VoIP Router DVG-1402S
Brand: D-Link Pages: 57
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
D-Link SharePort DIR-825 Quick Start Manual preview
SharePort DIR-825
Brand: D-Link Pages: 2

Brands by name

Popular brands

Load more brands