HP 9200C - Digital Sender, Getting Started Manual

Page: 27 / 254

Step 10. Verify the product installation
Use the following procedure to test the installation and configuration of the device.
1. On the device control-panel display, verify that the E-Mail and Folder options appear.
2. Place a document face-up in the ADF or face-down on the flatbed glass.
3. Touch E-MAIL on the control-panel display.
4. If prompted, type in your user name and password.
5. If you were not prompted to log in, touch From: and then type in your e-mail address.
6. Touch To: and then type your own e-mail address.
NOTE
Touch to delete any incorrect keystrokes.
7. Touch OK .
8. Press START . The device scans the document and sends it to you as an e-mail
attachment.
9. Repeat this process using the FOLDER option, and verify that the file is sent to the
correct folder.
If the document does not send the file correctly, verify your product installation and
configuration. For additional information, see the
HP 9200C Digital Sender User Guide or
HP 9200C Digital Sender Support Guide .
If the test is successful, you can now scan documents and send them to an e-mail address
or to a folder. See the
HP 9200C Digital Sender User Guide for detailed instructions about
how to use all of the send-to options, and see the HP 9200C Digital Sender Support Guide
for information about configuring all of the digital-sending features.
ENWW Step 10. Verify the product installation 21
English