HP 9000 V2500 SCA, Operator'S Manual

Page: 65 / 206

Chapter 3 43
SSP operation
Using the CDE (Common Desktop Environment) Workspace menu
V2500/V2600 Workspace menu options include:
• V-Class Complex: name—Opens this submenu for the node/complex.
If more than one node/complex has been configured, multiple V-Class
Complexes are available by name.
• Console—Creates a new console window for a list of available
node/complexes.
• Shells—Selects a shell:
sppdsh
,
ksh
,
tcsh
,
csh
, and
sh
shells.
• Diagnostic Tools—Performs a
do_reset
or invokes
cxtest
,
est
, or
xconfig
.
• ksh—Creates a new
ksh
window on the screen.
• consolebar—Creates GUI console select bar on the screen.
• ts_config—System monitoring, and diagnostic capabilities. Runs as
sppuser allowing the resetting of nodes/complexes and console session
generation.
• ts_config (root)—Configures the SSP console, system monitoring,
and diagnostic capabilities. Runs as root, requires the password,
allows reconfiguration of nodes multinode complexes, and
configuration of the terminal mux.
• teststation console—Creates a new console window on the screen.
NOTE Only one SSP console per node can be active at any time. If a new SSP
console is started, any existing SSP console sessions for that particular
node are disabled. The old console windows remain on the screen, but no
new console messages are sent to the old sessions. Only the most recent
SSP console will receive SSP console output.
• xsecure—Use this tool to disable modem and LAN activity.
• X tools—Lists several X tools including the load average display and
xlock
(screen lock/saver).
Workspace actions include:
• Shuffle up—Moves the bottom window in a stack of windows to the
top.
• Shuffle down—Moves the top window in a stack of windows to the
bottom.
• Refresh all—Refreshes the entire X display.