![background image](http://html.mh-extra.com/html/hp/9000-v2500-sca/9000-v2500-sca_operators-manual_164228114.webp)
92
Chapter 5
Configuration utilities
ts_config
Figure 50
ts_config
showing newly configured complexes
When remotely running
ts_config
, the Restart Workspace Manager
step cannot be performed, because it is the SSP Workspace Manager that
needs to be restarted. The Workspace Manager can be restarted at any
time by clicking on the desktop background and selecting Restart
Workspace Manager, then OK.
Any of the configurable parameters on the Multinode Configuration
dialog may be changed by selecting each node and choosing the
“Configure Multinode complex” action. Set the desired options and click
Configure. During a reconfiguration, several of the required fields in the
Multinode Configuration dialog are filled in by
ts_config
.
V2500/V2600 split SCA configuration
ts_config
also provides a “Split Multinode complex” action that takes
an SCA complex and logically splits it into single node systems. Each
node becomes Node 0 in a new complex.
The following procedure allows the user to split the SCA system:
Step 1. In the ts_config window, select the desired nodes.
Step 2. Select every node in the desired complex, then “Actions,” and then “Split
Multinode complex.” Figure 52 shows the
ts_config
Split Multinode
complex panel.
Summary of Contents for 9000 V2500 SCA
