HP 9000 V2500 SCA, Operator'S Manual

Page: 111 / 206

Chapter 5 89
Configuration utilities
ts_config
Step 4. Enter the required fields into the Configure Multinode Complex dialog
window.
• V-Class Complex Name—Current complex name of either node or a
new complex name.
• Complex Serial Number—Unique serial number of the complex. This
is not required if the nodes have the same serial numbers.
• Complex Key—Number required to enter the Complex Serial
Number.
NOTE If all of the SCA system complex serial numbers are the same, no
complex key is required.
Step 5. Select the desired node IDs from the “New Node ID” drop-down lists.
Step 6. If the console connection must be changed, select appropriate connection
from the “Console Connection” drop-down list.
Step 7. In the “Hypernode bitmask” section select “POST will determine
bitmask.”
Step 8. If necessary, select the desired CTI cache size from the “CTI cache size”
drop-down list.
Step 9. If necessary, select the node-local memory size from the “Node local size”
pull-down list.
NOTE The default settings for CTI cache and node-local memory are
recommended.