TURN
HOLD
. Carefully align and engage the Port 2 female contact
with the Port 1 male contact.
l
Tighten finger tight, then use the spanner and torque
wrenches to achieve the final torque.
Connect Port
2
l
Press 7-32 LINE. The HP 8510 makes six measurements.
All frequencies of the current range are measured, but only
data from 7 to 32
is used to compute error coefficients.
To remove the 7-32
air line:
l
Loosen the Port 1 nut, and then carefully move the Port 2
adapter away.
Disconnect Port 2
l
Move the adapter nut to its standard position.
Standard Position with Air Line Installed
l
Examine the outer and center conductors to see that they
are in place.
l
Carefully press the insertion tool onto the connector.
Connect the Insertion Tool
20
