2
.
Remove the two Torx T8M2.5×9.0 screws
(1)
and the three Torx T8M2.5×3.0 broad-head
screws
(2)
that secure the switch cover to the computer.
3
.
Turn the computer right-side up, with the front toward you.
4
.
Open the computer as far as possible.
5
.
Release the ZIF connector to which the button board cable
(1)
is attached, and disconnect the cable
from the system board.
6
.
Remove the switch cover
(2)
by lifting it straight up.
Reverse this procedure to install the switch cover.
Component replacement procedures 49
Summary of Contents for 6720s - Notebook PC
