3
.
Remove the following screws:
(1)
One Phillips PM2.0×6.0 screw
(2)
Two Torx T8M2.0×4.0 screws
(3)
One Torx T8M2.5×4.0 screw
4
.
Flex the left side of the base enclosure
(1)
until the external monitor connector
(2)
is clear of the
opening in the base enclosure.
5
.
Lift the rear edge of the system board
(3)
until it rests at an angle.
6
.
Remove the system board
(4)
from the base enclosure by sliding it back.
64 Chapter
4
Removal and replacement procedures
Summary of Contents for 6720s - Notebook PC
