HP 6720s - Notebook PC Maintenance And Service Manual Download

Page: 61 / 145

Remove the four Torx T8M2.5×7.0 screws

(1)

that secure the display assembly to the computer.

Lift the display assembly

(2)

straight up and remove it.

If it is necessary to replace the display bezel, display inverter, or display hinges, remove the eight

rubber screw covers

(1)

and the eight Torx T8M2.5×6.0 screws

(2)

that secure the display bezel to

the display assembly. The rubber screw covers are available in the Rubber Kit, spare part number

456616-001.

Flex the inside edges of the left and right sides

(1)

and the top and bottom sides

(2)

of the display

bezel until the bezel disengages from the display enclosure.

Component replacement procedures 53

Summary of Contents for 6720s - Notebook PC


















































































































































Search results

Summary of Contents for 6720s - Notebook PC

Reviews:

Related manuals for 6720s - Notebook PC

Brands by name

Popular brands

HP 6720s - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for 6720s - Notebook PC

Reviews:

Related manuals for 6720s - Notebook PC

Brands by name

Popular brands