Display assembly
NOTE:
All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description
Spare part number
15.4-inch, WXGA with BrightView
456802-001
15.4-inch, WXGA
456801-001
Before removing the display assembly, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 37
).
5
.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 40
).
6
.
Remove the following components:
a
.
Keyboard (see
Keyboard on page 46
)
b
.
Switch cover (see
Switch cover on page 48
)
c
.
Speaker (see
Speaker on page 50
)
d
.
Display lid switch module (see
Display lid switch module on page 51
)
Remove the display assembly:
1
.
Disconnect the display panel cables
(1)
and
(2)
from the system board.
2
.
Remove the wireless antenna cables
(3)
from the clips and routing channels built into the top cover.
52 Chapter
4
Removal and replacement procedures
Summary of Contents for 6720s - Notebook PC
