HP 656395-006 Maintenance And Service Manual Download Page 68 | Manualshive

Page: 68 / 88

background image

Diagnostic tools 68

HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS

is not running. To run this utility, boot the server blade using Intelligent Provisioning.
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and

other related data needed for effective server blade management. Available in Microsoft Windows and

Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the HP website (

http://www.hp.com/servers/diags

). HP

Insight Diagnostics Online Edition is also available in the SPP. For more information, see the HP website

(

http://www.hp.com/go/spp/download

).

HP Insight Diagnostics survey functionality

HP Insight Diagnostics (on page

67

) provides survey functionality that gathers critical hardware and software

information on ProLiant server blades.
This functionality supports operating systems that are supported by the server blade. For operating systems

supported by the server blade, see the HP website (

http://www.hp.com/go/supportos

).

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation,

or it can be installed through the SPP.

Active Health System

HP Active Health System provides the following features:

•

Combined diagnostics tools/scanners

•

Always on, continuous monitoring for increased stability and shorter downtimes

•

Rich configuration history

•

Health and service alerts

•

Easy export and upload to Service and Support

The HP Active Health System monitors and records changes in the server hardware and system configuration.

The Active Health System assists in diagnosing problems and delivering rapid resolution when server failures

occur.
The Active Health System collects the following types of data:

•

Server model

•

Serial number

•

Processor model and speed

•

Storage capacity and speed

•

Memory capacity and speed

•

Firmware/BIOS

HP Active Health System does not collect information about Active Health System users' operations, finances,

customers, employees, partners, or data center, such as IP addresses, host names, user names, and

«
...
66
67
68
69
70
...
»

Summary of Contents for 656395-006

























































































Reviews:

No comments

Related manuals for 656395-006

301160U - 1TB Ethernet Disk RAID Network Attached...

Brand: LaCie Pages: 5

Brand: Aaeon Pages: 38

Brand: IBM Pages: 51

Brand: AIC Pages: 101

Brand: ACTi Pages: 11

SuperServer 1029U-T Series

Brand: Supermicro Pages: 1

Brand: MISUMI Pages: 18

Brand: Olive Pages: 103

Brand: Speco Pages: 28

Brand: Brocade Communications Systems Pages: 176

Brand: NEC Pages: 138

Brand: Data-Tronix Pages: 29

Brand: Data-Tronix Pages: 30

Brand: Meinberg Pages: 112

ASR-3100PP-R11A1E

Brand: Advantech Pages: 86

Brand: Advantech Pages: 110

Brand: Nexcom Pages: 87

SD-WAN Edge 3000 Series

Brand: Dell EMC Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands