Removal and replacement procedures 30
CAUTION:
To prevent improper cooling and thermal damage, always install DIMMs of the same
height on the server blade. This server blade does not support mixing standard and non-standard
height DIMMs.
IMPORTANT:
This server blade does not support mixing LRDIMMs, RDIMMs, or UDIMMs.
Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS
initialization.
IMPORTANT:
The Intel Xeon E5-2600 v2 Processor Family can only be configured with the
1866-MHz HP Smart Memory or the 1600-MHz Low Voltage (1.35v) HP Smart Memory. The Intel
Xeon E5-2600 Processor Family cannot be configured with the 1866-MHz HP Smart Memory or
the 1600-MHz Low Voltage (1.35v) HP Smart Memory.
To identify the DIMMs installed in the server blade, see "DIMM identification (on page
80
)."
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Remove all DIMM baffles ("
DIMM baffles
" on page
28
).
5.
Locate the DIMM tool ("
Tool locations
" on page
81
) and remove it from the DIMM baffle.
6.
Remove the DIMM and then use the DIMM tool to close the DIMM slot.
To replace the component:
1.
Use the DIMM tool to open the DIMM slot.
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...