Removal and replacement procedures 38
SAS controller
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Disconnect the capacitor pack cabling, if connected ("
FBWC capacitor pack cabling
" on page
71
).
CAUTION:
Always remove the SAS controller before removing the drive cage.
CAUTION:
Always be sure that both captive screws are disengaged before removing the SAS
controller. Failure to disengage the screws may result in damage to the SAS controller or the SAS
backplane and bracket.
5.
Remove the SAS controller.
To replace the component, reverse the removal procedure.
NAND flash module
The NAND flash module only provides data backup for the FBWC option.
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Disconnect the capacitor pack cabling, if connected ("
FBWC capacitor pack cabling
" on page
71
).
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...
