Removal and replacement procedures 28
2.
Remove the enclosure connector cover.
To replace the component, reverse the removal procedure.
DIMM baffles
CAUTION:
To prevent improper cooling and thermal damage, always install the correct DIMM
baffles according to the DIMMs installed on the server blade.
Depending on the DIMMs installed on the server blade, this server supports one of two different DIMM baffles
(standard and non-standard height).
Be sure to install the correct DIMM baffle according to the DIMMs installed on the server blade:
•
Always install the standard-height DIMM baffles when the server is populated with standard-height
DIMMs.
•
Always install the non-standard (tall) height DIMM baffles when the server is populated with
non-standard (tall) DIMMs.
To determine which DIMMs are standard and non-standard height, see "Server blade components (on page
15
)."
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Disconnect the capacitor pack cabling, if connected ("
FBWC capacitor pack cabling
" on page
71
).
5.
Remove one or more DIMM baffles.
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...
