Removal and replacement procedures 58
14.
Remove the processor from the processor retaining bracket.
CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
15.
Install the processor socket protective cover in each processor socket.
16.
Retain all of the information on the serial label pull tab for use in installing the new system board.
17.
Remove the enclosure connector covers from the new system board and install the enclosure connector
covers on the damaged system board.
To replace the system board:
1.
Place the new server blade system board on a flat level surface.
IMPORTANT:
Install all components in the same configuration prior to removing the system
board.
2.
Install the FlexibleLOM ("
FlexibleLOM
" on page
35
).
3.
Install the mezzanine assembly ("
Mezzanine assembly
" on page
32
).
4.
Install the heatsink blank in processor socket 2 ("
Heatsink blank
" on page
31
).
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...
