Removal and replacement procedures 57
System board
CAUTION:
When returning a damaged system board to HP, always install all processor socket
covers to prevent damage to the processor sockets and system board.
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Remove all hard drives ("
Drive
" on page
26
).
5.
Remove all hard drive blanks ("
Drive blank
" on page
26
).
6.
Remove the front panel/drive cage assembly ("
Front panel/drive cage assembly
" on page
49
).
7.
Disconnect the capacitor pack cabling, if connected ("
FBWC capacitor pack cabling
" on page
71
).
8.
Remove the SAS controller ("
SAS controller
" on page
38
).
9.
Remove all DIMM baffles ("
DIMM baffles
" on page
28
).
10.
Remove all DIMMs ("
DIMMs
" on page
29
).
11.
Remove the FlexibleLOM ("
FlexibleLOM
" on page
35
).
12.
Remove the heatsink ("
Heatsink
" on page
50
).
13.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...