Removal and replacement procedures 65
3.
Align the system board, and then slide it into place inside the base pan.
4.
While holding the system board in place, turn the base pan on the side and install the two screws on the
bottom of the base pan.
5.
Place the server blade on a flat level surface.
IMPORTANT:
Install all components in the same configuration prior to removing the system
board.
6.
Install the front panel/drive cage assembly ("
Front panel/drive cage assembly
" on page
49
).
7.
Install the heatsink blank ("
Heatsink blank
" on page
31
).
8.
Install the SAS controller ("
SAS controller
" on page
38
).
9.
Install and route the cables for all capacitor packs. For more information on routing the cables, see
"FBWC capacitor pack cabling (on page
71
)."
10.
Install all DIMMs ("
DIMMs
" on page
29
).
11.
Install all DIMM baffles ("
DIMM baffles
" on page
28
).
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...
